Project Overview & Homeowner Objectives in Mars, Seven Fields & Valencia

After a major custom home build, kitchen remodel, or basement finish in Mars, Seven Fields, or Valencia, PA—across neighborhoods like Adams Ridge, Treesdale, and Lake Vue—ultra-fine drywall dust, tile grout haze, silicone smudges, and stray paint specks settle into every drawer slide, window track, and light fixture. Standard residential maid services are neither equipped nor insured for post-construction detailing: household vacuums blow fine gypsum dust straight through their exhaust bags back into the air (burning out their motors in an hour), and abrasive scrub pads permanently scratch tempered Low-E window glass and custom cabinetry. Dependable Home Solutions provides specialized 3-phase post-construction and turnover detailing engineered by builders who know how fine finishes are made.

Property Profile & Post-Construction Challenges

Following a 3,800-square-foot whole-home renovation off Route 228, the property required a complete Rough Clean, Final Detail Clean, and Puff/Touch-Up Clean prior to furniture move-in—covering 42 custom shaker cabinet boxes, three tiled bathrooms, 28 newly installed triple-pane windows, and two zoned HVAC systems.

Scope of Work & Builder-Grade Detailing Protocol

• Phase 1 (Rough Clean): Debris sweep, sticker/protective-film removal from appliances and windows, and initial HEPA vacuum pass.
• Phase 2 (Final Detail Clean): Top-to-bottom HEPA extraction of ceilings, crown molding, inside/outside of all cabinetry, window tracks, grout-haze removal, and fixture polishing.
• Phase 3 (Mechanical & Final Touch-Up): In-house HVAC register/boot vacuuming, fresh MERV 11 filter swap, and lighting globe/trim detailing.

HEPA 0.3-Micron Dust Extraction & Finish-Safe Surface Chemistry

Protecting Low-E Glass, Quartz & 2K Catalyzed Cabinetry

Construction dust is highly abrasive; wiping drywall or masonry dust across a newly sprayed cabinet door or stainless steel range with a dry rag acts like fine sandpaper. Our crew begins every room by extracting loose particulate from ceiling fan blades, recessed LED trims, crown molding ledges, inside Blum soft-close drawer glides, and deep inside window sash tracks using commercial sealed-system HEPA 99.97% vacuums fitted with soft natural horsehair brush nozzles. On the new windows, we safely removed manufacturer labels and stucco/paint specks using non-scratch plastic blades and Unger microfiber sleeves that never damage delicate factory coatings on tempered glass.

Removing Tile Grout Haze Without Etching Stone

In the three newly tiled bathrooms and foyer, we removed residual polymer grout haze using pH-balanced, non-acidic tile cleaners and microfiber agitation pads, then sanitized all porcelain fixtures, freestanding soaking tubs, and frameless Starphire glass panels until every surface gleamed under high-CRI lighting.

HVAC Boot Sanitizing & EPA Lead-Safe Clearance Standards

Stopping Dust From Recirculating the Day You Turn On the Heat

The #1 reason newly remodeled homes keep getting dusty weeks after the cleaners leave is that nobody cleaned inside the HVAC duct boots or changed the construction furnace filter. Our team unscrewed every floor and wall supply register and cold-air return grille, washed the metal grilles, HEPA-vacuumed deep inside the sheet-metal duct boots, and installed a brand-new pleated MERV 11 media filter at the furnace—delivering a truly move-in-ready home that meets our strict EPA Lead-Safe Certified Firm white-glove verification standards.

Dependable Home Solutions | PO Box 23, Worthington, PA 16262 | (724) 243-2553 | https://www.dependablehomesolutions.net | PA HIC #PA212478 | EPA Lead-Safe Certified Firm | Hours: Mon–Fri 8:00 AM – 4:00 PM